Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

is there any Example code for Microchip ENC28j60 ethernet controller Chip?

Status
Not open for further replies.
P

Port Map

Advanced Member level 4
Joined
Aug 24, 2013
Messages
118
Helped
15
Reputation
30
Reaction score
14
Trophy points
1,298
Activity points
2,089
Hi,

I want to use ENC28j60 chip to send data from PC to FPGA using TCP protocol.

Does any one know, Is there any example VHDL/Verilog or Microblaze code for this work?

I'll be so thankful for replies.
 

There is a reasonable library out there from microchip (can't believe I just said that), which you then would have to port to microblaze.
 

Very thanks for your replies. I get the library.
Now,
Is that library ready to be used in Microblaze? or I should change it for use?
 

Microchip ENC28J60 ethernet driver (MAC + PHY) program
may be helpful
**broken link removed**
 

I would be very much surprised if a microchip library worked as is on microblaze. So yes, you will have to make some changes. "Which ones?" I hear you ask in a predictable fashion. "Well, the required ones you are going to find about as part of your work" I then reply.

What you can do is grab a few ports of it floating around on the internet, then do a diff for some inspiration.
 
can anyone tell where can I find the verilog code for the same.. (I am using xc3s50)

thanks in advance
 

Fat chance of finding that. Better use a softcore mcu implementation.
 
My controller not only needs to do this function. It is just one of them. I think it would be less memory consuming if it is direct implementation using verilog. correct me if I am wrong.

will be easy to learn how it is implemented in softcore mcu and convert it to verilog?

I have a code for the same as C libraries (used for microcontroller). Is there a way to convert them to verilog?

my questions may be silly bcoz I am new to this and have very little idea about them.
 

Port Map said:
Hi,

I want to use ENC28j60 chip to send data from PC to FPGA using TCP protocol.

Does any one know, Is there any example VHDL/Verilog or Microblaze code for this work?

I'll be so thankful for replies.
Click to expand...


Hey hi, I want to do the same just in reverse. I would like to use the ENC28j60 chip to send data from FPGA to PC using TCP protocol. I was wondering if you could help me out. I want to accomplish the procedure mentioned above using Verilog. Hope you can help me. Anyway, thanks in advance.
 
Last edited by a moderator:

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top