Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

sim300cz v3.04 gprs problem.. please help

Status
Not open for further replies.

Aya Hannoura

Newbie level 5
Joined
Jun 11, 2013
Messages
9
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
60
hi i use sim300cz with static ip sim card from Vodafone on hyper-terminal try to connect gprs to receive data but nothing received at end give me closed.
can any one help me please
thats the commands:
at


OK

at+cgatt=1


OK

at+cgdcont=1,"IP","realip.vfe.net"


OK

at+cstt="realip.vfe.net","internet","internet"


OK

at+cdnscfg="62.240.110.197","62.240.110.198"


OK

at+ciisr


ERROR

at+ciicr


OK

at+cifsr


62.240.101.231

at+cipstatus


OK



STATE: IP STATUS

at+ciphead=1


OK

at+cdnsorip=1


OK

at+cipstart="tcp","www.google.com","80"


OK



CONNECT OK

at+cipsend


> GET / HTTP/1.1
Host: https://www.google.com
Connection: Keep-Alive
Accept: */*
Accept-Language: en-us


SEND OK

CLOSED

i dont know why nothing received is there any other setting i have to do ??

- - - Updated - - -

i can make udp connection with my pc ip address..
but how to work tcp is there any other setting to get reply
 

no there is signal i check csq and udp connection done but tcp no..
and if i check at+cipmode it +cipmode:0 not 1 i dont know why and if i try to change the value i got error at+cipmode=1
 

same commands as i wrote i dont know y i didnt receive any data
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top