Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

reduction of side lobes of antenna array usin genetic algori

Status
Not open for further replies.
A

abti

Junior Member level 1
Joined
Jul 7, 2004
Messages
19
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
195
Planar Antenna Array

Hi everybody!

I need to investigate some array arrangements for my planar antenna. The tutorial from CST-MWS provides an example of an array of planar antenna fed by coax. The antenna in my case is fed by CPW line. Can i do the array simulation by just copying the single element and leave the port so ?

Or do I have to connect all the single ports i.e. all the CPW lines together to form just one single main port ?

I really don't have any idea. Please shed some light on this...

Thank you very much for your help.

Regards,
abti
 

Re: Planar Antenna Array

It depends what do you want to simulate, i guess.
Actual antenna arrays are multi port devices, every port is excited
using a seperate feed. Planar arrays are generally used for scanning. Array elements are phased differently to form the beam at the desired angle. Implementations require a complicated feeding structure.

However in the litrature, you will see the term "active element pattern". This is simple measure to the antenna performance. Single antenna is excited and others are open circuited. This way, array is modeled as a one port device.

so you have two choices:
1) define a one port device
2) define a multi-port device. ie. 16 ports for a 4x4 array.

ps: Do not connect the cpw lines together; that will give you nonsense results.
 

Re: Planar Antenna Array

onurb said:
It depends what do you want to simulate, i guess.
Actual antenna arrays are multi port devices, every port is excited
using a seperate feed. Planar arrays are generally used for scanning. Array elements are phased differently to form the beam at the desired angle. Implementations require a complicated feeding structure.

However in the litrature, you will see the term "active element pattern". This is simple measure to the antenna performance. Single antenna is excited and others are open circuited. This way, array is modeled as a one port device.

so you have two choices:
1) define a one port device
2) define a multi-port device. ie. 16 ports for a 4x4 array.

ps: Do not connect the cpw lines together; that will give you nonsense results.
Click to expand...


hey sir ...
l'm also doing a planar array design using CST .. but l'm confused on whether l shoudl feed each element separatly or just use the transmission lines to feed all the elements with a single port .... Also, l'm confused on which type of feed port l should use ( coaxial post, edge port or should use another way fit the application) .. but each time l use the coaxial port feed l got an error with the matrix solver and the calculation get aborted ... l really dont kn wat to do and l'm so stressed coz l have tried many ways but since now l could get actual results .... :(

thank you and l really appreciate ur help ...:)
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top