Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

how i can find lambda in mos transistor

Status
Not open for further replies.
S

So.nia

Member level 3
Joined
Feb 6, 2013
Messages
62
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
1,662
hello all;

i need to give lambda λ , so i can calculate L where i will used to design transistor mos
thanks ;
 

λ is a parameter technology and depends on what technology you use.
 
  • Like
Reactions: So.nia

    S

    So.nia

    Points: 2
    Helpful Answer Positive Rating
I use CMOS technology and i need it to design my cicruit
 

You can just use the equation Id = 0.5 Kn (W/L) (Vgs - Vth)2 (1 + λ Vds)

Do the simulation for Different Id, Vgs, Vds, You have two unknowns Kn and λ which you can then calculate.
These values will change with the operating conditions. λ will vary with Vds and Id and a lot of other parameters.

You might have to do a bunch of simulations and get a bunch of values. You can take a average of them or keep all the values and use each when when required.

If Ro or Rds or Gds of a transistor is provided in the dc operating point solution, you can use the equation Ro = 1/(λ*Id)
 

Actually i make simulation whith PSPICE and i need to introduce the geometric parametres lake L , W , AS ( Source Area) and AD (source Area) .

i need the relation to calculate these parameters and what the relation with λ

thanks
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top