Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Antenna Ratio in Antenna Rule file

Status
Not open for further replies.
A

anandt886

Newbie level 2
Joined
Oct 5, 2010
Messages
2
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,298
Hello Everyone,

I am doing a project on physical design and came across some antenna violations in my design....

When i checked for the violations all the violations were on the top level metal layer...

I know it can be fixed using Antenna diodes, but what i didnot understand when i saw the antenna rule file is that the antenna ratio for all other metals were around 200 or 300.. but only for the top metal layer the antenna ratio was 0.1...i could find the reason why the antenna ratio is very less only for the TOP metal layer?

Can anyone throw some light on this ?
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top