Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

LED indication problem

Status
Not open for further replies.
Y

yviswanathbe

Full Member level 4
Joined
Jun 14, 2007
Messages
221
Helped
10
Reputation
20
Reaction score
6
Trophy points
1,298
Activity points
3,066
Hi,

I need a circuit of LED indication.

My Voltage source(Battery) is 10 to 160Vdc. When ever the source is connected i need to show a LED for indication.

Can any body suggest me any idea.

Thanks and Regards,
Viswanath
 

You can use something similar to this:

1905126700_1356272490.png


Remember to take into consideration the power loss in the resistor and in the transistor.

Hope this helps.
Tahmid.
 

Hi Tahmid,

Thanks for sharing the circuit.

I have done in a different way.But my circuit needs auxiliary power supply. When i try to derive it from the battery, the circuit draws more current. that shouldn't happen in my case.

View attachment Battewry Indication.bmp

Your circuit seems to be working perfect. I tried in simulation.

Thanks again for the circuit.

Regards,
Viswanath
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top