[SOLVED] Wavecom Q2686 AT commands to upload the data to the webserver

Hi Folks .. !!
I am using a Freescale controller along with the "Q2686 Wavecom GPRS" module for uploading the data to the webserver using the serial communication protocol . I couldn't find out the relevant AT commands for the GSM modem specified above .

Can anyone help me in finding the AT commands for the above modem ???

Hi RaoBharath,

You need to know that the exact documentation of AT command for those modem is related to the firmware version you got on your device.
I have attached the AT command documentation corresponding of the very last version of the FW (7.47 at this time). Let me know if it is ok for you.

To get information on Wavecom modems, http://www.sierrawireless.com/ web site can be useful to you.
Please note that Wavecom is now known as Sierra Wireless AirPrime product line.
To get the documents you're looking after, you'll need to open an account on the site, but it should be easy.
Once you have your account, you can access to files related to your modem by the support+downloads sections, your modem is now called AirPrime Q2686.

Please note that your account will also give access to Sierra Wireless Developer Forum, where you can find community of developper using Wavecom/AirPrime modems.
You'll also access to **broken link removed**, which have technical documents (like tutorials, how to's etc) and presentation on SierraWireless product solutions.

Hope all of that can help you!

Hi lbarthelemy,

Thanks a lot for helping me out, Really helped a lot since i couldn't find it any where in the internet .

Hi RaoBharath,

I'm glad my previous post helped you .
I hope the above mentionned Sierra Wireless web sites can also help you in the future.