Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

[SOLVED] proteus overload cpu problem fix it

Status
Not open for further replies.
M

mailus

Full Member level 4
Joined
Mar 6, 2012
Messages
234
Helped
7
Reputation
16
Reaction score
7
Trophy points
1,308
Location
-
Activity points
2,706
please tell the solution for my problem??

in Proteus software when simulation process going the error message shows CPU is overloaded. (i use i3 processor and Intel board and inbuilt Intel graphic software).:arrow:
 
Last edited:

hi,

Try to close other unwanted programs running.
If you are using 7 segment display or More number of of led's or analog components there is a chance of such errors...
Try to modify from System->Set Animation Options menu the frame per seconds and timestep per frame.
 

I don't think it's possible to eliminate the problem unless your program is very basic and simple.

I have this problem in all my simulations and I doubt you can get past it. What are you trying to simulate? You may increase the speed by changing some stuff.

This happens due to the large number of calculations required to be performed that can not be done in real time. However, this should not stop you from simulating as this doesn't affect the simulation accuracy.

You can improve it by making some changes, eg using digital buffers and inverters instead of some transistor stages, slowing down frequency and speed of components where possible, etc.

Close as many programs running in the background as possible.

Hope this helps.
Tahmid.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top