Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Sending UDP from one Transmitting board to another 2 boards

Status
Not open for further replies.
M

marwafareed

Newbie level 6
Joined
Sep 27, 2007
Messages
11
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,371
Hi,

Wish you all a nice day.

We need to send data from one transmitting board to two receiving boards, we are connecting them via Ethernet using TCP/IP protocol.

We connect the three boards as attached, but it was found that it is necessary to connect both the transmit and receive pins in the second receiving board to the receive and transmit pins in the transmitter.

Can we use the attached connection in case of UDP? ; (there is no need to connect the transmit & receive pins in the second receiving board to the transmit and receive pins in the transmitting board).

Kindly advice.

Thanks & Regards
 

Attachments

  • system_description (1).doc
    134.5 KB · Views: 104

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top