Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Synchronizing two function generators

Status
Not open for further replies.
M

MobiNaz

Full Member level 3
Joined
Aug 11, 2010
Messages
163
Helped
5
Reputation
10
Reaction score
4
Trophy points
1,298
Location
SYDNEY
Activity points
2,432
Hi all,

Can anyone advise, I need to synchronize two signal generators. How do I do that and what signals should I look at to say the devices are synchronized.



Thanks in advance
 

use the trigger signal...
one of the function generators trigger output should be given to the others trigger input.. thats all... :)
 

Function or signal generators? They are 2 different things.

Signal gen: use the 10 MHz frequence reference on the back panel to drive the other signal generator as a slave. Observe both sine wave outputs on a 2 channel oscilloscope to make sure one signal is not "walking" in phase with respect to the other.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top