Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

padstack hole dia in allegro

Status
Not open for further replies.
G

goal

Junior Member level 3
Joined
Aug 28, 2008
Messages
31
Helped
8
Reputation
16
Reaction score
8
Trophy points
1,288
Activity points
1,453
hi,
i want to create a padstack for TH connector.
the connector footprint says 40mils dia. but the actual pin is 25mils.
so my doubt is if this 40mils is the actual drill to be made on the board?
please help
 

Is the pin square or round, a square pin that is 25mils (0.635mm) has a diagonal of 35mils (0.9mm).
What is the connector?
 

it is circular pad. the connector is a header
 

I said what shape is the pin of the header that is going into the hole, not the pad shape!
 

goal said:
hi,
i want to create a padstack for TH connector.
the connector footprint says 40mils dia. but the actual pin is 25mils.
so my doubt is if this 40mils is the actual drill to be made on the board?
please help
Click to expand...


Hi goal,

We have different types of component pin lead. example round type and square type i think your connector pin type is square, In the option you need to choose 40mil drill size. during square pin type component foot print creation we neee to consider digonal distance.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top