Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

problem in reset circuit for 89s52

Status
Not open for further replies.
H

hassan ali

Member level 2
Joined
May 18, 2010
Messages
47
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Location
egypt
Activity points
1,667
hi,.....sorry for my English

i have build up my own project but there is a problem, always when i power up my circuit the controller doesn't work from the first time it needs a reset button and it hang up more times i don't know why it's hang up i change the controller with another but the problem is still exists , and i want to know the problem in reset circuit , please help me in short time.
 

check the reset circuit
**broken link removed**
use 10k or the 8.2K as shown in figure
or post your circuit..
 
i build up this circuit but the controller still hang up , how can i fix this problem??????
also , why the program doesn't work from the first time ??????
 

check the voltage at pin 9 when you press the switch.. how much voltage are you getting... put a 0.1uf or 100nf capacitor at the supply and ground points of controller....
 
when i pressed on reset switch the voltage on pin 9 is equal to 5.12volt!!!!!!!!!!!!!!!!!
 

1) yes there may be problem in reset circuit.
2) please check 5v powersupply it should not rock solid
 

I think your 89S52 broken. I always make this schematic NO Problem.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top