Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Effect of feed location using Zeland IE3D

Status
Not open for further replies.
Mohammed EL_Kenawy

Mohammed EL_Kenawy

Newbie level 5
Joined
May 1, 2011
Messages
9
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
Egypt
Activity points
1,333
Hey

Could you help me please ,

I want to see the effect of feed location on freq, Return loss & Bandwidth
by varying the feed location along the length
of the patch from the origin (center of patch) to its right most edge. The coaxial probe feed used is designed to have a radius of 0.5mm.

the length and the width of the patch L = 22 mm, W = 31 mm

for example for different feed locations (3,0) , (4,0) , ....

• f = 1.9 GHz
• ε r = 11.9
• h = 1.5 mm

using zeland , I want to know which tools used to determine feed location and how to feed it by coaxial probe and how to see the effect of Return Loss & Bandwidth ...

please help me ,
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top