Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

How to feed and inverter

Status
Not open for further replies.
E

ether2802

Newbie level 3
Joined
Mar 19, 2011
Messages
3
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,301
Power input source for inverter

Ok so I want to use a backlight panel from a laptop (as the LCD is broken) as a light source for night photography, after reading and searching on how much voltage do I need to power up the backlight, I found that I need the inverter, so pulled out the inverter from the laptop also, but now I can't find how to power up this inverter and how much voltage would I need, can someone help me...?? BTW I'm hoping it to be super portable, so if I can use a 9V battery that would be awesome...!! (hopefully that 32V 2A is not the input requirement)

here are some pics

IMG_0374.jpg

IMG_0376.jpg

IMG_0377.jpg
 

32V/2A seems to be the fuse rating, a notebook inverter will usually work with the primary battery voltage. But there are additional control signals that have to be supplied to the connector (on-off and intensity control).
 

Ok so there is no chance I can "simply" power up this inverter, still, keeping it portable...?? is there a diagram I can follow to see how many stuff do I need to power this inverter...??
 

My first question is, what brand model laptop is it? They all use different inverters for their backlights. It looks like a six terminal connector, one of which is probably 12VDC, this is to power the inverter circuit, another is an on/off, this requires a voltage, most of the time 3.3VDC or 5VDC to turn the inverter on. Usually one terminal is floating (not connected). The other two probably control dimming.
 

I am not familiar with that inverter and I can't find any documentation on it. You can find the inverter power terminal easily, use a multimeter and test continuity to find the terminal that connects directly to the 2A fuse. This is your +12VDC power, possibly pin 1.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top