Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

[SOLVED] Which all are the common methods to test a Microcontroller to verify it's functioning

Status
Not open for further replies.
blooz

blooz

Advanced Member level 2
Joined
Dec 29, 2010
Messages
560
Helped
121
Reputation
242
Reaction score
116
Trophy points
1,343
Location
India
Activity points
4,985
Which all are the basic tests for checking the functionality of a micro controller
like
RAM test
ROM test

have you any good article on the topic and programs .
Micro-controller :pIC 16F series
 

hi
you can test the RAM by writing a value to it, read it back and compare the same with the actual value.but have ever found such a problem? or you feel something is wrong with the RAM or ROM?
when you program the controller with a standard programmer, it will check the Flash by "varify" feature.if you are writing some thing to the any memory, you can read it back and compare the same with the actual value to check whether your program/memory is ok or not

ml
 
  • Like
Reactions: blooz

    blooz

    blooz

    Points: 2
    Helpful Answer Positive Rating
I am Actually implementing a custom microcontroller on FPGA ..need some test strategy
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top