Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

pls help to design an uwb antenna using Hfss

Status
Not open for further replies.
A

abinaya rajasekaran

Newbie level 5
Joined
Jan 27, 2011
Messages
10
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,283
Activity points
1,337
I am new to hfss. I want to do my final year project in uwb antenna design using hfss 11.please help me to design an antenna.I attached my base paper.
 

Attachments

  • cancer.pdf
    864.8 KB · Views: 256
Last edited:

Hello,

Some things to consider before starting the actual design and simulation:

Frequency range
Acceptable VSWR – Return Loss within the required frequency range
Directivity
Dependency of directivity on frequency.
Radiation efficiency
Gain
Polarization
Maximum size
2D or 3D shape allowed
Allowable dispersion (depends on system requirements)

Designing wide band antennas is (always) a compromise. Small, wide bandwidth and good radiation efficiency don't go together.
 
Last edited:
Hi abinaya,

You want to design omnidirectional or Directional UWB antenna ?


/SC
 

hi,
Well then its not a big deal. you can easily design an omnidirectional UWB antenna which covers the entire UWB frequency range from 3.1-10.6 GHz. For example you can have a look at Circular patch antennas,Bow-tie antennas,circular fractal monopole antenna,quasi-selfcomplimentary-UWB antenna etc....all these antennnas are UWB omnidirectional antennas.

They have simple Geometry and very easy to build and simulate in HFSS.

/SC
 
sweetchoto said:
hi,
Well then its not a big deal. you can easily design an omnidirectional UWB antenna which covers the entire UWB frequency range from 3.1-10.6 GHz. For example you can have a look at Circular patch antennas,Bow-tie antennas,circular fractal monopole antenna,quasi-selfcomplimentary-UWB antenna etc....all these antennnas are UWB omnidirectional antennas.

They have simple Geometry and very easy to build and simulate in HFSS.

/SC
Click to expand...

how about designing an uwb antenna in lower frequency range (UHF range), is it as easy as designing in 3.1-10.6 Ghz?
 

omni directional UWB at 3.1-10.6 very easy but at low frequency it has some hardship for more information about UHF log priodic antenna u can see the A-info website
 
this software calculate LPDA antenna for u and you and simulated in hfss after calculate with this software
 

Attachments

  • lpda.exe
    56 KB · Views: 183
ferdows said:
this software calculate LPDA antenna for u and you and simulated in hfss after calculate with this software
Click to expand...

sir ferdows, thanks alot for this program, it's give me an option to use LPDA, as a Ultrawide band one :)

---------- Post added at 18:44 ---------- Previous post was at 18:40 ----------
ferdows said:
this software calculate LPDA antenna for u and you and simulated in hfss after calculate with this software
Click to expand...

sir ferdows, thanks alot for this program, it's give me an option to use LPDA, as a Ultrawide band one :)
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top