Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Adding PLB module to AMBA

Status
Not open for further replies.
G

grubby23

Junior Member level 3
Joined
Nov 22, 2007
Messages
30
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
1,606
Hi all,

I have a SoC with an AMBA bus but now I have to add a module that has an PLB interface. So I am wondering if anyone did this in the past and can tell me what is the best approach. Is there maybe something like a "tutorial" where I am
told which PLB signals map to which AMBA signals?

Many thanks,
Martin
 

Or even an IP core would be good that has a wrapper for both bus system. Most likely I could learn than from this how
to route the signals.

Cheers
 

Hi,

Which plb interface is there with your ip, master or slave? Which AMBA bus you are going to use AHB or APB or some other?

Visit this topic,

i design similar thing to connect IP(which has avalon) interface , with AHB bus. This bridge can connect IP which has avalone slave interface with AHB bus as slave.

HTH
Shitansh Vaghela
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top