Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Buck-Boost Regulator GSM application with li-ion battery

Status
Not open for further replies.

pozzari

Junior Member level 1
Joined
Feb 27, 2006
Messages
15
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,394
I have a li-ion battery charged with a charge chip, but when it is fully charged or charging the output to the system is 4.2Volts, and when is discharging the voltage go down (near 3 volts).
So i need a Buck-Boost Regulator form my GSM application, my modem is a motorola G24( 3.3 volts) and have a current peak when transmitting.
what is the Buck-Boost Regulator i need to use to extract power when battery is under 3.3 volts ?
I found a some regulators, but most regulators i found cannot be found on digikey or mouser (some of then is out of production).
Thanks for suggestions
 

Hi

Try Linear Technology.
Check out there buck-boost devices like LTC3127

Regards
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top