Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

24VDC derived from ±12VDC

Status
Not open for further replies.
S

sepe

Newbie level 6
Joined
Mar 16, 2010
Messages
11
Helped
1
Reputation
2
Reaction score
0
Trophy points
1,281
Location
Adelaide
Activity points
1,344
Hello,
I am looking to generate 24VDC from a ±12VDC Power supply. The component I wish to use is Traco Power TEN25-1222.
This dcdc converter gives us +12V and -12V. My qeustion is how to use these two to generate 24VDC?
Any help would be great.
Thanks.
 

In the dual-output version such as the TEN12-1212 the voltage between +Vout and -Vout is 24V, so don't use the common pin, but only +Vout as +24V and -Vout as the "NEW" GND ..

IanP
:wink:
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top