Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

How to display an electric field of a 3D structure in LiNb03

Status
Not open for further replies.
C

checca2

Newbie level 1
Joined
May 21, 2004
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
8
hfss help me :(

I have a 3D structure in LiNbO3. An antenna is positioned on the structure. I want to display a cut of the electric field on a plane trasverse the structure.
 

Re: hfss help me :(

if in the hfss system,you can define a cut plane before the simulation,after you finish the simulation,then display the electromagnetic distributated field in this cut plane
 

Re: hfss help me :(

I think you can do it after the simulation, too. Create a plane at the position you want it and plot the E-field on this plane.
 

Re: hfss help me :(

You'll need to set up an 'infinite sphere' for far or near field under radiation. The 3d plot is pretty easy to get as a report but have a look at the coordinate sys on the 3d plot - the phi and theta are reversed. Something to keep in mind when you want a specific cut.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top