+ Post New Thread
Results 1 to 3 of 3
  1. #1
    Newbie level 4
    Points: 1,470, Level: 8
    Achievements:
    7 years registered

    Join Date
    Nov 2009
    Posts
    5
    Helped
    0 / 0
    Points
    1,470
    Level
    8

    Exporting gerber file from cst microwave studio

    Hi,

    I am new to CST as well as PCB milling. I tried exporting a antenna simulation from CST as a gerber file. ISOPRO does not register the aperture list for some reason. All it shows is D999 with 0 width.

    I also tried to view the gerber file using McCAD. Again McCAD shows an empty aperture table. Any ideas why this is happening.


    Really appreciate your help.

    Thanks

    •   Alt19th July 2010, 23:03

      advertising

        
       

  2. #2
    Member level 3
    Points: 1,034, Level: 7
    aey's Avatar
    Join Date
    Nov 2009
    Posts
    63
    Helped
    7 / 7
    Points
    1,034
    Level
    7

    Re: Exporting gerber file from cst microwave studio

    i'm not sure. try manual create aperture.



    •   Alt20th July 2010, 05:07

      advertising

        
       

  3. #3
    Newbie level 3
    Points: 233, Level: 2

    Join Date
    Dec 2011
    Posts
    4
    Helped
    0 / 0
    Points
    233
    Level
    2

    Re: Exporting gerber file from cst microwave studio

    Hi all, greetings to all,

    I'm currently designing a 180 degree compact rat-race hybrid coupler for butler matrix network. I divided my rat-race into 8 sub-structures : 4 t-junctions, 2 bends and 2 straight lines. I've already obtained the results for each part of my sub-structure. But now i'm not sure how to combine the structures so that i can obtain the output for the whole rat-race hybrid coupler that is 180 degree phase difference. I'm aware of exporting the sub-structures to DXF file format but i am not sure which environment or how is the step to combine it and get the combined rat-race hybrid coupler output.

    Appreciate very much if you can help. Thanks

    Best & Warmest Regards,
    SAMClick image for larger version. 

Name:	Bend.png 
Views:	7 
Size:	87.0 KB 
ID:	66045Click image for larger version. 

Name:	straightline.png 
Views:	5 
Size:	107.8 KB 
ID:	66046Click image for larger version. 

Name:	t-junction.png 
Views:	8 
Size:	127.9 KB 
ID:	66047



--[[ ]]--