Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

ADUc841 to control RF Switch, adding the relay circuitry

Status
Not open for further replies.
J

jeff07251985

Newbie level 1
Joined
Apr 23, 2010
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,286
Hi everyone,
I have a simple question. I am going to design using an ADUc841 to control RF Switch. I need to add a relay for ADUc841. Which pin can I assign? by the way, do I need to worry about doing this design? I apprecitated that your reponse.
 

Re: ADUc841 add with a relay

Hi

You can use any pin who can act as I/O

You can't drive relay directly - you will need to use some driver - NPN or MOSFET transistor

All the best

Bobi
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top