Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

ferrite transformer design details

Status
Not open for further replies.
V

vidya.m

Newbie level 1
Joined
Feb 13, 2010
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
bangalore
Activity points
1,290
could u pls provide me details of ferrite core transformer design used in flyback converter
 

Every company every brand, every model will have its own winding details. Any ways, You may try this....wind 30 turns of 20 swg on the primary and 1000 turns of 33 swg on the secondary. Thaz it...Cheers:D:D
 

vidya.m said:
could u pls provide me details of ferrite core transformer design used in flyback converter
Click to expand...

You need to be specific about AC/DC, power and voltage in/out.

Keith
 

If you don't know what you'r doing, I strongly recommend *not* doing what "pranam77" said.
 
you have to provide input volt, output volt, output current , and operating frequency to design a transformer
 

Hi vidya.m,
Check pls "PI Expert Design Software"_ you can calculate very good your ferrite transformers with it:)... Its free downloadable.
w*w.powerint.com/design-support/pi-expert-design-software
K.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top