Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Planar array design using CST ....

Status
Not open for further replies.
H

hajar2008

Newbie level 5
Joined
Nov 29, 2009
Messages
9
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
malaysia
Activity points
1,348
hello everyone ...

l'm doing a design for a planar array for a smart antenna ... l'm using CST program for my design and l need to do a comparison for the function of the antenna when a 2*2, 4*4, 8*8 and 10*10 elements of the planar array are used ...

so, shall l use a coaxial port to feed each element or l should use the transmission line techniques to feed them all with a single normal port ...

actually, l'm looking for the way which is gana give me the better and compatible design for my application ...

so l need ur experience to help me in this ... :)

thanks ...;)
 

For antenna radiation patterns and efficiencies, you can use EM-Core to simulate them.

Infor for download and antenna design can be found at

https://www.pedasoft.com/
**broken link removed**
 

yafayez said:
For antenna radiation patterns and efficiencies, you can use EM-Core to simulate them.

Infor for download and antenna design can be found at

https://www.pedasoft.com/
**broken link removed**
Click to expand...



thank you sir ... i just took a look in the decuments in the links and it seems to be so useful ... but should l just download the trail version .. or l can just get a cracked copy .... :)
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top