Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Digital panel meter - Ref voltage at 36 pin is oscillating

Status
Not open for further replies.
V

vundela

Newbie level 1
Joined
Nov 19, 2009
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
hyderabad
Activity points
1,287
Digital panel meter

Hi,
Iam using IC 7107 LED Driver for my ³½ Digital panel meter.Some DPM's are working properly.In some DPMs Ref voltage at 36 pin is oscillating.Why this problem is coming.Some one help me.
 

Re: Digital panel meter

Have you got a 'CReference' capacitor fitted between pins 33 & 34 ?

If you have, the most likely cause is noise on the supply line to the IC, try fitting an extra capacitor (try 10uF) across the supply pins, you may have feedback from the LED multiplexing current.

Brian.
 

Digital panel meter

Also in addition to the sugession by Betwixt, i would like to add that in India, many spurious and sub standared IC's from china are pushed by dealers which are not so accurate. Try with those Ic's from Intersil which are available with a price difference. Cheers
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top