Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Feko warning 563: The mom matrix is numerically singular, so

Status
Not open for further replies.
D

DVTSIM

Newbie level 2
Joined
Feb 6, 2007
Messages
2
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,291
singular field+feko

Feko warning 563: The mom matrix is numerically singular, solution very critical.

I try to a patch antenna but at low frequency down to 30-100MHz, the near field (10mm away from patch) is wrong.

Any idea, comments.

DVTsim
 

singular field feko

The numerically singular warning means your geometry is electrically small. You probably have the patch antenna designed to resonate at 1 GHz+ and now you want to simulate at 30 MHz. That is not going to work.
 

warning 563

By default FEKO uses single precision solver as far as I know. This might be not enough for such non-well conditioned simulation. Try to switch to double precision and check if it works.

If you attach your project I can simulate it alternativey with EMC Studio MoM solver.
 

Re: Feko warning 563: The mom matrix is numerically singular

e_m_c said:
By default FEKO uses single precision solver as far as I know.
Click to expand...

Yes. You can switch to double precision under Solution settings.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top