Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

HFSS Cursor Problem - I can see only the regular cursor

Status
Not open for further replies.
M

moss8040g

Newbie level 2
Joined
Jun 21, 2009
Messages
2
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
Summerville SC
Activity points
1,298
Re: HFSS Cursor Problem

I'm running HFSS V11 under Vista, and I'm having problems with the cursor.

I can see the regular cursor, but I cannot see the little diamond that usuall drags along with it on the grid that can be used for snapping to objects/grid.

Any suggestions on how to activate it?

Thanks,

Terry

Added after 4 hours 52 minutes:

Turned out to Windows Vista Aero. Set your Vista display settings to standard windows, and everything works.....

Terry
 

Found the solution. The problem lies in the display. Changing the color display to 16bit corrects the problem.
 

I have exactly the same problem with HFSS 12 in Windows 7.
But changing to 16 bits or anything that reduces the display quality makes the display area of HFSS to not work at all, it becomes gray.

Any ideas??

Thanks,

Ariana
 

Re: HFSS Cursor Problem

I'm having this problem also. I'm using HFSS 13. The cursor shows up normally, and then for some reason it just isn't showing up anymore. I tried restarting HFSS. I tried changing the colors to 16 bit. I'm running windows XP.

It's painfully difficult to draw bondwires if you can't see what you are clicking on.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top