Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

How can we know what VDD is suitable for an application?

Status
Not open for further replies.
J

jts

Newbie level 5
Joined
May 25, 2009
Messages
9
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,354
Hi all,

I'm planning to design my digital controller using 65 nm CMOS process with standard VDD of 1.2V. But I'd like to make it lower, say 0.6V-0.8V.

What factors should I consider before I can decide what voltage to use? I'm thinking of the maximum speed required for the controller (in my case, it's about 10 MHz). Can anyone help me out?

Thanks.
 

You should to consider following:
- thresholds of NMOS and PMOS transistors
- maximum operating voltages of NMOS and PMOS transistors
- maximum operating frequency
- input and output logic levels (may be different from internal logic levels)
 

Thanks very much Gevy.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top