Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

please help for 128x64 lcd

Status
Not open for further replies.
T

tumee

Member level 1
Joined
Oct 26, 2007
Messages
34
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
1,508
atmega 128x64

I'm doing graphic lcd project. The lcd is 128x64 microcontroller is atmega32.
Please help how can do lcd setting and imagine picture and text in the 128x64 graphic lcd.
Please help me.
 

lcd 128x64 26 pins

Hi

How to access the LCD from ATMEGA depend on type of LCD controller used - see data sheet of LCD display

Try to do search for LCD controller name using google -- you will probebly find some project who use this type of LCD

All the best

Bobi
 

instruction set lcd 128x 64

hello all.
My used graphic lcd has no any mark because this is china lcd.
The lcd has only pin mark. CS1, CS2, D/I, E, Reset, R/W, DB0-DB7 and power pins.
So this display might be same as other display with mark.
How can do instruction set of the display? how can iimagine picture and text any place of the display? Please help me?
 

display n73 on atmel

It seems that the controller of your LCD is KS0108.

You can find many examples for this LCD and one can be found here

**broken link removed**
 

atmega 128 x 64 lcd

To be sure you can look for the IC numbers in teh back of your LCD. You can have some memory ICs but you will find a microprocessor IC in your LCD module. Looking for the datasheet of that processor you will find the instructtions and so on.

Fortunatelly the are no many different kinds of processors. You will find the start up procedure, registers for operation and also the way of writing text and graphics
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top