Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

stk 463 stero amplifer help

Status
Not open for further replies.
T

The74namesofgod

Junior Member level 3
Joined
Jun 1, 2008
Messages
31
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
1,494
stk463

i found a Schematic on line that is a little confusing to me. is this Schematic telling me the capactents of the capactiors and is so what is the voltged. there is something that is on the (2 and 4) pin and (13 and 15) pin that says 8p what is that.
maybe im posting this in the wrong area?
 

stk 463

The74namesofgod said:
i found a Schematic on line that is a little confusing to me. is this Schematic telling me the capactents of the capactiors and is so what is the voltged.
Click to expand...
The very old circuit has a max supply voltage of plus and minus 38VDC. Capacitors connected to the supply voltages and connected to the output should have a voltage rating that is higher, maybe 50V.

there is something that is on the (2 and 4) pin and (13 and 15) pin that says 8p what is that.
Click to expand...
8p is an 8pf capacitor.
 
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top