Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

[50 pts] Using Spectre/Eldo Netlist with ADS

Status
Not open for further replies.
AdvaRes

AdvaRes

Advanced Member level 4
Joined
Feb 14, 2008
Messages
1,163
Helped
113
Reputation
220
Reaction score
51
Trophy points
1,328
Location
At home
Activity points
7,442
spectre to eldo converter

Hi members,

Is it possible to use Spectre or Eldo netlist with ADS. I need to perform some RF analysis using Agilent ADS since I dont have Spectre/Eldo RF.

I'll donate 50 pts for Real help.
Dont hesitate to contact me in PM if you like.

Thanks in advance.
 

eldo netlist

ADS can support Spectre netlists in 2005A or later, see Spectre-Compatible Process Design Kits

Use the

simulator lang=spectre

function at the top of the file and

simulator lang=ads

at the end and it can then be handled as if it was an ADS netlist.[/url]
 

    AdvaRes

    AdvaRes

    Points: 2
    Helpful Answer Positive Rating
netlist converter ads

ADS is also HSPICE compatible now.
 

    AdvaRes

    AdvaRes

    Points: 2
    Helpful Answer Positive Rating
ads netlist

man , there is a feature in ADS called netlist converter
this takes the netlist of ELDO /SPECTRE / SPICE /HSPICE
and convert it into ADS netlist and , then u can simulate using ADS

khouly
 

    AdvaRes

    AdvaRes

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top