Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

ADC : Not Shown Stable Reading on Hyperterminal

Status
Not open for further replies.
G

gurpreet312

Member level 2
Joined
Feb 5, 2008
Messages
45
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,288
Activity points
1,588
Hello,

I am New for ADC

I am working on ADC CS5460 24 Bit SPI Based.
I can communicate with ADC very fine "Means Reading and writing Some Default Registers.

But I am NOT able to see Stable reading which i actual want to measure on HYPER TERMINAL also see some Garbage values Randomly Not periodically.

Why?

Can any one sent me some sample program for CS5460 for Voltage and Current Measurements?




Thank You


Gurpreet Singh
 

hi..
i think you have already completed your project with cs5460. so, plz can you tell me how to read adc result on hyper terminal??
 

Hi

In order to see stable result on A2D you will need to use a stable ref voltage and to avarge the reading of the A2D

Read the A2D 100 time , sum the result and divide by 100

You will not be able to that using hyper treminal

All the best

Bobi
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top