Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

need a stable driver for Enc28j60

Status
Not open for further replies.
N

naderus

Member level 1
Joined
Sep 7, 2004
Messages
32
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
213
enc28j60 driver

Hi
I need a driver for ENC28j60 that can work with all rev no. 4, 5 and 7.
I test the microchip enc28j60 driver with an AVR with SPI @ 8MHZ, but it isn't really stable when I get a frame, usually I read the bytes to read in the enc28j60 header, bigger than than normal packet, the microchip code test this and if happen reset the micro or init enc28j60 again.(it depend on the version). when I send packet simultaneouslly with get packet, almost always I get this error.
I test these code in my while loop.
Please if someone have a stable code that work fine send it to me.

Thanks.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top