Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

VB or LabView what to choose

Status
Not open for further replies.
E

ehsanelahimirza

Full Member level 6
Joined
Feb 24, 2006
Messages
334
Helped
28
Reputation
56
Reaction score
7
Trophy points
1,298
Activity points
3,570
AOA

i m working on my final year project which will have some GUI and will be interfaced by serial, parallel port.

i dont know VB or Labview programming (will learn one of these)

PLZ give here ur recommendations and comments for which langauge or software to choose and learn giving their incentives to the other

thanks very much
 

If your project is going to require a serial or parallel port interface, I would recommend that you learn LabView. Programming the serial or parallel port interface is definitely going to be easier in LabView, and even the GUI programming will probably be easier in LabView.
 

if u dont know vb...then go for labview.
its gui are very attractive and powerfull:D:D
 

VB is good if you need MS Access kind of database and if you use any ActiveX. The Serial and Parallel ports can be accessed through VB too. If you are going to use any special hardware like RS485 to RS232 converter, Mod Bus etc, you need LabVIEW. LabVIEW is having good support for instrument controllers and Addon cards. If you feel that your hardware may grow and you need future support then best choice is LabVIEW.

..
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top