Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

SDR SDRAM controller code needed (Verilog/VHDL)

Status
Not open for further replies.
V

vlsi_whiz

Full Member level 4
Joined
Nov 12, 2005
Messages
216
Helped
49
Reputation
98
Reaction score
24
Trophy points
1,298
Location
Penang
Activity points
3,139
sdram controller verilog

Hi,

Does any one have the SDR SDRAM controller code with a generic local side interface (Addr, Data, WR#, CS#,etc). I've tried the opencores, but it does not suit my design. Even looked at altera's version, but its customized for a certain processor (has the commands coming from local side to controller).

Even if you have the specs and state machines for the SDR SDRAM controller, that would do.
 

sdram vhdl

Thanks, but the controller does not have the local side data IO. I need the data IO to switch the SDRAM between the two DSPs.

I may need to modify your code. Thankz anyways.
 

sdram model hdl

search on opencores.org
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top