Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

how to get E, H distribution for arbitrary frequency

Status
Not open for further replies.
T

tenderne

Member level 2
Joined
Jan 9, 2007
Messages
46
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
1,621
my method now is: after FDTD calculation, we can get E. H data in time domain. To get E.H distribution for arbitrary frequency in post-processing, we have to store all the E.H data in time domain followed by FFT.

However, if i got a big structure, say 1000,000 cells, it is not so practicable to store all the data in time domain.

anybody has any expeeriences regarding this issue? thanks a lot in advance.

regards,
tenderne[/b]
 

There is an easy solution to this. You will need to continually perform an integration that computes your frequency-domain field values. This way you only need to store one more set of field values for each frequency of interest. You can down a copy of my PhD dissertation. I summarize FDTD in Chapter 6 and describe this Fourier transform procedure in section 4.2.9 starting on page 98. The link to the dissertation is:



-Tip
 

hi, rrumpf,

thank you very much for the reply. but if we don't know the frequency before FDTD caculation, then how? thanks. :lol:

regards,
tenderne
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top