Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

How to store and read/write data from 6T SRAM

Status
Not open for further replies.
E

electronics_sky

Member level 3
Joined
Feb 9, 2006
Messages
64
Helped
3
Reputation
6
Reaction score
2
Trophy points
1,288
Activity points
1,827
I have study 6T-SRAM but quite confuse right now. Can anyone give an intuitive description about 6T-SRAM. Please descrive how it can store data and its read/write operation.

many thanks in advance.
 

Re: 6T SRAM

Hi,
The 6T sram consists two invertors conected back to back and 2T for bit selection line. The bit line are first prechrged and the coresponding reads or writes are performed by selection transistors. during read charge diff is sensed by opamp, during write data to be stored is aplied through transistors.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top