stn0795
Newbie level 3
I have 2 voltage levels on my board, 3.3V and 12V.
I connect the DRAIN to my programmable IC and pull up to 3.3V.
What voltage level should I pull up for the GATE?
I know I can use either 3.3V or 12V. What will difference if I use 3.3V or 12V?
Thanks,
stn0795
I connect the DRAIN to my programmable IC and pull up to 3.3V.
What voltage level should I pull up for the GATE?
I know I can use either 3.3V or 12V. What will difference if I use 3.3V or 12V?
Thanks,
stn0795