elessar95
Newbie level 5
Hi i have an experiment at vivado.If i do this i will pass the course.So help me please.
In this experiment we are trying to implement pool filling and discharging system. The way the system works is as follows:The amount of water in the pool will be shown instantaneously in one of the seven segment displays.If we press the btnR button pool will start to filling pool.When we do not press the btnC button system will stop the filling pool.When we press the btnL button pool will start to discharge pool and when we do not press the btnL button system will stop discharging pool.4 switch will gonna use(from 0 to 3).The filling / unloading speed will be entered into the system at 8 different levels with 4 switch.If the entered speed level is the highest (4'b1111 from the switches) then 2 liters per second will filling or discharging.If the entered speed step is the lowest(4'b0000 from swithces), 1 liter of filling / unloading will be done in 4 seconds.The pool can have a minimum of 0 to a maximum of 9 liters.To indicate that the pool is full led 15 must be blinked.((led[15]:1'b1)To indicate that the pool is empty led 14 must be blinked.(led[14]:1'b1)
Sorry for bad english.I do not want to whole code.But if you can do this it would be magnificient thing for me.Please dont think you must do this alone.Instructor doesnt help us nor student assistants.If i run this code i will pass please help.Thank you.
In this experiment we are trying to implement pool filling and discharging system. The way the system works is as follows:The amount of water in the pool will be shown instantaneously in one of the seven segment displays.If we press the btnR button pool will start to filling pool.When we do not press the btnC button system will stop the filling pool.When we press the btnL button pool will start to discharge pool and when we do not press the btnL button system will stop discharging pool.4 switch will gonna use(from 0 to 3).The filling / unloading speed will be entered into the system at 8 different levels with 4 switch.If the entered speed level is the highest (4'b1111 from the switches) then 2 liters per second will filling or discharging.If the entered speed step is the lowest(4'b0000 from swithces), 1 liter of filling / unloading will be done in 4 seconds.The pool can have a minimum of 0 to a maximum of 9 liters.To indicate that the pool is full led 15 must be blinked.((led[15]:1'b1)To indicate that the pool is empty led 14 must be blinked.(led[14]:1'b1)
Sorry for bad english.I do not want to whole code.But if you can do this it would be magnificient thing for me.Please dont think you must do this alone.Instructor doesnt help us nor student assistants.If i run this code i will pass please help.Thank you.
Last edited by a moderator: