Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

CA3130 OP-AMP equivalent IC

Status
Not open for further replies.
M

mohsen 2012

Member level 4
Joined
Jul 3, 2012
Messages
70
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
1,796
Hello guys i want to build this ultrasonic bird repeller :

electronic-pest-repellent-schematic_3.gif


but i d'ont found the OP-AMP CA3130 . can i replace it with CA3140 or CA3160 ??
please help me and thanks
 

Hi,

The CA3130 is used as oscillator.
It is a switching application.
Therefore i recommend a rail to rail output comparator with push pull output.

No special specifications besides this.

Klaus
 

The opamp simply slowly changes the ultrasonic frequency. The CD4017 clock input does not need a rail-to rail voltage swing and the opamp does not need to have a rail to rail output. I think any opamp will work, even a lousy old 741 opamp.
 

Yes 3140 is a direct replacement (exact same specs but 3140 goes up to 4.5mhz instead of 15)
 
Last edited:

plouf said:
Yes 3140 is a direct replacement (exact same specs but 3140 goes up to 4.5mhz instead of 15)
Click to expand...
No they do not have the same spec's. The output of the CA3130 is Cmos and is rail to rail. The output of the CA3140 is bipolar and is not rail to rail but it does not matter for the simple opamp in this circuit.
 

pleae tell me if can i use lm741 instead opf the ca3130 ??
can the 741 do the job 100% like the ca3130 ???
thanks
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top