Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

hard disk not detected while booting??

Status
Not open for further replies.
try to set up ms windows with another dvd.or try this dvd on another ms windows to find out it performs.
 
  • Like
Reactions: ambi

    ambi

    ambi

    Points: 2
    Helpful Answer Positive Rating
in bios it is not detected? :roll:
 

If you can hear drive spinning, it has power. Then try another data cable (the thinner ribbon one) and try another SATA channel on the board, they usually have at least four. Need to see model name showing in bios under a submenu like devices. Also can try a CMOS reset, either a button on the board hold for 5 seconds while system powered off or just take out the coin battery for 5-10 seconds. Otherwise hard drive is probably defective.

Larry G
 
  • Like
Reactions: ambi

    ambi

    ambi

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top