Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Help finding proportional valves, gas/liquid, operated with PWM

Status
Not open for further replies.

Franck C

Newbie level 1
Joined
Jun 26, 2014
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
10
Hello!

I am working on the design of a machine for which I need to control gas and liquid flows.

For this I need proportional valves that can be operated with PWM. As I am newcomer in the field of electronics (and "building things"), I would be grateful if I could get some help on this. I found a few valves meeting my criteria (and budget), but all of them were designed for large flow rates and had connected ends which were too big. I'm looking for something to which about 5 mm-diameter tubes can be connected, and a flow rate that does not need to be huge but above 5 L/mn. Would you have any model recommendation?

Thank you in advance for your help, it will be much appreciated!

Franck
 
Last edited:

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top