Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

dimension of Radiation box in HFSS

Status
Not open for further replies.
V

vishal_sonam

Full Member level 3
Joined
Jan 19, 2012
Messages
187
Helped
14
Reputation
28
Reaction score
14
Trophy points
1,298
Activity points
2,457
Hello
I want to know that What should be the Dimension of radiation box in hfss?
 

Hi.
you should be choosen the size of air box,lambda/4 larger than substrate or your design.
your design should be completely inside of air box.
Good Luck.
 

my substrate dimesnion is 42x 24x 1.6
Lenth= 42 mm, Width= 24 mm and height= 1.6mm
so then what should be dimenstion of radiation box.
 

Hi.
ok.
whats your operated frequency?
 

λ=c/f=30/2.5=12cm
λ/4=3cm
L=42+2×30=102mm
W=24+2×30=84mm
H=1.6+2×30=61.6mm

- - - Updated - - -

and your substrate is located in center of radiation box.
 
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top