Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

PADS Blazerouter (split/mixed plane)

Status
Not open for further replies.
D

davorin

Advanced Member level 3
Joined
Jun 7, 2003
Messages
901
Helped
11
Reputation
22
Reaction score
4
Trophy points
1,298
Location
Switzerland
Activity points
7,349
pads split mixed

Why does blazerouter doesn´t autoroute anything on layers with split/mixed type?

Manual routing is possible though....
 

It is generally consider that if split/mixed plane is there..
then it means that it is for only power plane...VCC or GND..
and hence no router supports routing on this type of planes..

tom..
 

Hmm..thought so too...friend of mine told me it was possible...

Maybe let blazerouter do the job and switch to mixed/split plane on the final design might be a solution...
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top