Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Chipscope analyzer problem with buffered data

Status
Not open for further replies.
E

ehsan_iut

Junior Member level 1
Joined
Jun 22, 2007
Messages
17
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
Singapore
Activity points
1,395
Hi, I am using chipscope analyzer. after the trigger signal it shows the buffer has some data. but it is not full. Then I select Stop button. but It does not show buffered data. Is there anything I do not take into account?
 

Re: chipscope problem

are you sure your jtag connection is ok, are you using it for other task at the same time like for gdb ?
 

Re: chipscope problem

Yes, the Jtag is OK, because when the buffer becomes full it automatically shows the waveform!
 

Re: chipscope problem

i had phenomenas like this in the past, look like your system is instable.

are you debugging a cpu code right now, or anything that can distrupt your jtag connection ?
 

chipscope problem

I also use xmd but before I use chipscope I exit that program.
 

Re: chipscope problem

so i understand you are not working with the debugger at all ?

is your cpu works correctly during this time or it crashes ?
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top