Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Meaning of Spurious Interrupt

Status
Not open for further replies.
Shivashankarayya

Shivashankarayya

Junior Member level 2
Joined
Apr 10, 2010
Messages
22
Helped
6
Reputation
12
Reaction score
6
Trophy points
1,283
Location
Bangalore, INDIA
Activity points
1,439
Hi everyone,

I want know the meaning of spurious interrupt & why it is used .Could anyone please me know ?

Thanks in Advance.....
 

spurious interrupts are unwanted interrupts of short duration on any interrupt input line..

caused due to some design problems ,electrical inteference, signal glitch.
reason for spurious interrupts are actually the unstableness of interrupt signal.
it can be also produced when the processor detects error in processing an interrupt request
 
Last edited:
No one would choose to implement a 'spurious interrupt', unless perhaps it was in some sort of random fault generator!

tralne has indicated some likely causes for spurious interrupts, and they are all symptoms of faulty design, faulty circuits or faulty components. One additional cause must be faulty software; there are several design faults which can lead to the software incorrectly handling an interrupt while it is processing a previous interrupt. Conditions in which multiple interrupts can occur in rapid succession may appear as 'spurious interrupts' and will reveal software faults which can go unnoticed for years.
 
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top