Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
hi
RTL schematic refers to the logic u implemented, means it is having all gates and components u mentioned...........
Technology schematic means the equivalent blocks to u r logic in the library,..,,,,,,,
after clicking on the technology schematic u will have LUT (Look up table) all those are well defined in the library......
after dumping the program into the FPGA kit, all these elements in the technology schematic will be placed and routed..............
if I have understand the RTL is the image of a design independantly of the FPGA circuit, and the technology schematic is the image of the design within the FPGA right!
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.
