Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

150W Power Supply Design

Status
Not open for further replies.
M

manojdharap

Junior Member level 2
Joined
Oct 16, 2010
Messages
20
Helped
4
Reputation
8
Reaction score
4
Trophy points
1,283
Activity points
1,402
I want to design low cost 150W (25V,6A) power supply from 115V I/P. I am able to come up with fly-back converter design using TOP261 from PI. Is there any other cost effective way of design available or can you add few tips to make existing design cost effective?View attachment TOP261.bmp
 
Last edited:

I tried with Texas switch-pro option. but TI parts are limited to I/p voltage <60V. while my requirement is 115V & 1.9A A/C I/P. so after conversion from AC to DC with diode bridge rectifier, DC O/p will be >100V which Ti parts can not handle.
 

Hi Manoj,

You can Use St Micro L6599 resonant converter IC.
You can find a 400Watts desing from this link.
**broken link removed**
 
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top