Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

electric brush test for

Status
Not open for further replies.
R

rhu

Newbie
Joined
Apr 28, 2008
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,298
electric brush test for some resistor measurements

hello all , i need help ... how can i measure the transition resistance between brush and braid , that use in alternator ?
Specified values are between 27 and 63 mOhm for 4-point measurements between the braid and the top of the brush, where it contacts the slipring of the alternator.

thnk...
 

Hi all

I work in a company that makes electromedical equipments. To be aproved all of our products must pass a series of tests, EMC, insulation(4KV), mechanical and ground connection resistance as well. The resistance must be in the range of mili Ω. To measure this we use a equipment that forces a current of about 60A
pass through the ground connections and the equipment measures the voltage across the ground circuit and calculate the resistance R=U/I.

Best Francisco
 
  • Like
Reactions: rhu

    R

    rhu

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top