Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

DC motor using PIC 18F(microchip)

Status
Not open for further replies.
P

poonamjo

Newbie level 3
Joined
Aug 30, 2010
Messages
3
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,283
Activity points
1,302
Hi ,

I am over all new for motor deriver working .:sad:
I am working for Robotic project .for that we are using PIC18F controller .
Please provide me detail to start my work :idea:.




Thanks
Poonam
 

1. Study how motor drivers work
2. Study how PIC work, configuring, programming, debugging by blinking LED
3. Combine both of them :)
 

It depends on what motor you want to drive, there are hundreds of different combination. I would advise you to first check out a simple servo motor, as it is easy to interface and donot require much circuitry, for other DC motors, try a simple H-bridge which is commonly used and circuit can be found on google images easily
 

    V

    Points: 2
    Helpful Answer Positive Rating
What you want to know? just to drive DC motor?
u can use transistor drivers, ULN series ICs
 
Last edited:

I am working for robot arm project . i am using PIC18F2331 this controller for servo Dc motor dervier .i want some sample code which guid me for rotation of robo arms to some degree .
Give me help which complier i use for this work.
plz help me out on same:-:)?:
 
Last edited:
  • Like
Reactions: fazal

    F

    fazal

    Points: 2
    Helpful Answer Positive Rating
you can use l293d for driving simple DC motors, and as far as pic controllers are concerned, it is a high end controller and the data sheet itself has a lot of explanation for initializing ports and other peripherals.
 

Hi All,

Thanks for ur reply.
we have PIC-SERVO SC (servo motor) board which i have to interface with my board intel board (where camer is detect the object) .useing intel board i have send commnade to PIC-SERVO SC -board to rotate my rob arm in 5 -DOF .I want to understand the trajectory parameter implentation the rotation or sample code to implement it plese help me out i am new on this .


Poonam
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top